Wet Milling Machine

Discover HONCHON's advanced 5-axis wet milling machine designed for precise dental restorations. Perfect for milling lithium disilicate, titanium bars, and composites with high efficiency and reliability. Enhance your dental lab's capabilities with versat

INQUIRY

Description

Product Overview: HONCHON 5-Axis Wet Milling Machine
Important characteristics:
5-Axis Linkage: Enables flexible and accurate dental restoration milling.
Tool Magazine: Has a 10-tool capacity, which allows for uninterrupted operation.
Water Level Monitoring: Wet milling is safe and effective when there is integrated water monitoring.
Material Compatibility: The machine can be used for a variety of dental restorations since it can grind a broad range of materials.

Axis rotation A-axis: 360°, B-axis: ±20° is the operating angle.
1.2 kW of total power
Precision of Cutting: 0.01 mm
Tool Magazine Ten tools are in its capacity.
Processing technique: 5-axis linked wet milling
Bursts Details: Tools specific to handles with a 4 mm diameter
Speed on Main Axis: 0-60,000 rpm
Operating Bar: 4.7–7.5 bar
Voltage stability: 220-230V
6.0 bar is the stable air pressure.

For dental labs wishing to quickly and effectively mill a range of materials into high-quality restorations, this 5-axis wet milling equipment is perfect. Call +8613055185196 or send an email to info@honchon for more details.

FQA:
Q: How many milling burs will the wet dental milling machine be equipped with when it leaves the factory?
A: The wet dental milling machine has a total of 10 tool magazines, and 6 milling burs are randomly carried when it leaves the factory, 3 for milling emax and the other 3 for milling titanium rods.
Q: Does the wet dental milling machine automatically change milling burs?
A: Yes
Q: Does the wet dental milling machine automatically change blocks?
A Yes, after the layout is done, after one block is milled, it will automatically change to another one.
Q: How many spindles does the wet dental milling machine have? What is the motor technology?
A: 5 axes, the motor technology is servo motor.
Q: What is the spindle power of the wet dental milling machine?
A1200w.
Q: What is the maximum tilt angle of the wet dental milling machine?
A: It is 120 degrees.
Q: What is the shank diameter of the milling burs of the wet dental milling machine?
A:4.0mm
Q:What materials can a wet dental milling machine mill?
A:Milling Emax, Premill, composite materials
Q：What is the rated power of a wet dental milling machine?
A:1500w
Q:How long does it take for a single crown to be milled by a wet dental milling machine?
A:About 30 minutes/crown
Q:What is the air pressure of a wet dental milling machine?
A:6.0 bar or above
Q:Does a wet dental milling machine require an air compressor?
A:Yes, it does (oil-free, water-free)
Q:What are the computer configuration requirements for a wet dental milling machine?
A: Processor (minimum): Intel Core i7 2,8GHz
Processor (recommended): Intel Core i7/i9 3,2GHz (non-AMD processor)
RAM memory (minimum): 16 GB
RAM memory (recommended): 32 GB
Graphics card: NVIDIA (we recommend NVIDIA, other brands of graphics cards cannot be guaranteed. It is recommended to choose NVIDIA independent graphics card GTX2060 and above)
64-bit operating system
The computer system disk (C drive) is preferably a solid state drive
Apple computers are not allowed, and win8 and XP systems are also not allowed
The computer needs to have a USB3.0 interface for the scanner

Inquiry